WEICON Copper Paste | 1 kg | Protector, Separator and Lubricant for High Temperatures

WEICON Copper Paste | Protective, separator and lubricant agent for parts subjected to high stresses and high temperatures PROPERTIES: WEICON Copper Paste is a protective agent, separator and lubricant, resistant to high temperatures, corrosion, has a strong adhesion and is free of sulfur, lead and nickel. APPLICATION: WEICON Copper Paste is used as an assembly lubricant for screw connections and sliding surfaces of all kinds. It forms an effective lubricating and separating layer on insertion tools, wear bushings, screws, screw-on, plug-in and bayonet joints of all kinds, protecting functional surfaces against corrosion and contact corrosion. It can be used to reduce vibrations in brake shoes and guides, brake cams and pins, car and truck battery poles and other electrical connections, wheel bolts or wheel nuts and wear bushings of electric, pneumatic and hydraulic hammers. PRE-TREATMENT SURFACES: First clean the surface to be lubricated with WEICON Degreaser S, depending on the degree of dirt. If the screws are already in use, treat them with a wire brush and clean them with WEICON Degreaser S. SAFETY: When processing WEICON products, the physical, safety, toxicological and ecological data and regulations of our CE safety data sheets must be observed. TECHNICAL DATA: Base oil: mineral oil Color: copper Solid lubricant: ground copper | graphite Temperature resistance: -20 to 11.1°C

• CHARACTERISTICS – WEICON Copper Paste is a protective, separating and lubricating agent, resistant to high temperatures and corrosion, has a high adhesion and is free of lead and nickel.
• DETAILS - The paste forms an effective lubricating layer on insertion tools, screws, threaded, pluggable and bayonet joints of all kinds, protecting against corrosion and rust.
• APPLICATION - WEICON copper paste is used as a high temperature lubricant for screw joints and sliding surfaces. Can be used to reduce vibration.
• Quality – 100% German quality – Copper paste meets the highest quality requirements in compliance with physical, safety, toxicological and ecological standards.
• PROCESSING - Apply copper paste with brush, brush, cloth or plastic sponge. For the screws, apply the copper paste to the bottom of the thread. Do not mix with fats or oils.